Tooth whitening: current status and prospects.

As a safe, effective, economical, and convenient technique, tooth whitening is one of the most popular treatments for improving tooth discoloration. This review summarizes the theoretical and recent research developments in the classification and mechanisms of tooth discoloration, as well as the principles, agents, effects, and side effects of tooth whitening techniques. The aim is to provide a basis for the clinical treatment of tooth whitening techniques and to suggest possible new ideas for further research. The accepted mechanism of whitening is the redox reaction of oxides in the whitening reagent, and the whitening effect is remarkable. However, side effects such as tooth sensitivity and irritation of gum and other oral soft tissues can still occur. It is recommended that more monitoring be carried out in the clinic to monitor these side effects, and care should be taken to protect the soft tissues in the mouth during office whitening procedures. Furthermore, there is a need to develop new additives or natural whitening products to reduce the occurrence of side effects.

The Efficacy of Different Antibiotic Compounds in Regenerative Treatment of Immature Necrotic Teeth.

Objectives: Endodontic treatment of immature teeth poses a significant challenge, especially in achieving a proper seal using traditional obturation methods. Revascularization presents itself as an alternative approach to this problem, and the application of triple antibiotic paste (TAP) has been suggested as a means to achieve disinfection during the procedure. This study aims to compare the antibacterial properties of three different antibiotic combinations to assess their effectiveness on root canal disinfection. Materials and Methods: Eighty samples were employed to assess the impact of three antibiotic combinations on Enterococcus faecalis, Escherichia coli, Streptococcus mutans, and a combination thereof. The antibiotics included metronidazole, ciprofloxacin, and cefaclor (CCM), the commonly used TAP, and a double antibiotic paste (DAP) composed of metronidazole and ciprofloxacin. Dentin shavings collected using Gates-Glidden drills were placed in microtubes containing a 2ml standard bacterial suspension. Microtube contents were diluted and cultured on BHI agar plates, with colony counts calculated based on dentine shavings' weight in CFU/mg. Kruskal-Wallis and Dunn's post-hoc tests were used for statistical analysis and P<0.05 was considered significant. Results: A significant difference in mean CFU was observed among all bacterial groups (P<0.05). Dunn's post-hoc analysis showed a significant difference only between the control group (methylcellulose) and the other antibiotic groups. There was no significant difference between the other antibiotic groups in two-by-two comparisons. Conclusion: There was no significant difference in the antimicrobial properties of DAP, TAP and CCM. Therefore, DAP and CCM may be used during regenerative treatment.

Whitening Efficacy of Toothpastes on Coffee-Stained Teeth: An Enamel Surface Analysis.

AIM: This study aimed to identify the optimal toothpaste for removing coffee-induced stains while also evaluating its impact on tooth enamel through roughness and abraded depth parameters, providing a comprehensive understanding of their effects. MATERIALS AND METHODS: Three whitening toothpastes and 2 conventional toothpastes were prepared for a simulated brushing procedure on coffee-stained bovine enamel tooth specimens. Using a toothbrushing machine, up to 10,000 brushstrokes were completed, while spectrophotometric readings were taken at designated intervals. A mixed-effects model for statistical analysis determined the effects of toothpaste and brushing on colour change, roughness, and abraded depth. RESULTS: Whitening toothpastes significantly deviated from the control (P < .001, P < .001, and P < .003, respectively), whereas the conventional toothpaste did not exhibit a significant contrast (P < .081). Regarding colour restoration following coffee staining, whitening toothpastes showed higher restoration than conventional toothpastes. Surface roughness and abraded depth parameters increased with accumulated brushing. CONCLUSIONS: Sodium hexametaphosphate-containing toothpaste demonstrated the highest efficacy in removing coffee-induced stains and restoring tooth colour. Nevertheless, this stronger whitening effect was associated with increased abrasion. While conventional toothpastes exhibited some whitening effects, the most substantial improvement in lightness was consistently observed with whitening toothpastes. CLINICAL RELEVANCE: Understanding how whitening toothpaste affects enamel integrity is crucial for refining formulations and advancing dental care. This knowledge lays the groundwork for more effective oral care products and improved whitening procedures, ultimately enhancing the overall quality of dental treatments.

Tetracycline staining of the dentition: a review of the literature and report of a clinical case.

The present article reviews the literature regarding tetracycline staining of the dentition and its esthetic management. A total of 49 articles were identified in the initial search, and 22 articles met the eligibility criteria of this narrative literature review. Tetracycline staining results from its use in children between the ages of 6 months and 6 years, when tooth crowns are formed; the effects are dependent on the dosage, duration of treatment, stage of tooth mineralization, and activity of the mineralization process. Tooth bleaching is always the first treatment option for low-grade cases of tetracycline staining. Restorative procedures are indicated for severe staining. The article also describes the treatment of severe staining affecting the maxillary anterior dentition of a 48-year-old man who reported the systemic administration of tetracycline during childhood. Direct composite resin laminate veneers were proposed to achieve immediate, highly esthetic restorations. A combination of different resinous materials in different shades was applied to meet the needs of the patient. The use of direct composite resin laminate veneers satisfied the functional and esthetic demands of the patient at a lower cost than ceramic materials.

The Efficacy of Different Laser Applications on Dentin Sealing in Preventing Discoloration Induced by Mineral Trioxide Aggregate.

The aim of this in vitro study was to evaluate the effect of the pre-application of a dentin-bonding agent and the application of different lasers on the prevention of tooth discoloration caused by mineral trioxide aggregate (MTA) in the presence of blood. Sixty extracted human anterior teeth were selected, with root lengths standardized to 10 mm and root canals shaped using Gates-Glidden drills #3 to #5. The samples were divided into six groups (n = 10): Group 1 with no surface treatment and Groups 2 to 6 with Optibond universal adhesive and Neodymium yttrium aluminum garnet (Nd:YAG), Erbium yttrium aluminum garnet (Er:YAG), Erbium-chromium-yttrium-scandium-gallium-garnet (Er:Cr:YSGG), and diode laser applications, respectively. Root canals were filled with fresh human blood, and ProRoot MTA and a collagen barrier were then placed. Color changes were measured with a spectrophotometer at 0, 7, 30, 90, and 180 days post MTA placement. Color differences (∆E) were analyzed using a two-factor mixed-design ANOVA with the Sidak method (p = 0.05). All treatment groups exhibited discoloration above the acceptability threshold. Although all treatment approaches exhibited less color change compared to the control group (p < 0.05), there was no significant difference among them in terms of preventing color change (p > 0.05). It was determined that none of the methods could guarantee 100% prevention of discoloration caused by MTA-blood contact.

Influence of Post-Curing in Nitrogen-Saturated Condition on the Degree of Conversion and Color Stability of 3D-Printed Resin Crowns.

Post-curing is the process of applying extra light to complete the polymerization process of 3D printing. The mechanical properties of light-cured three-dimensional (3D) printed resin can be improved by decreasing the oxygen concentrations during post-curing, and nitrogen-saturated post-curing has been applied for this purpose. This study aimed to evaluate and compare the color stability of 3D-printed resin crowns that were post-cured in both normal air and nitrogen-saturated conditions. Crowns were fabricated with a 3D printer and post-cured in normal air (control group; air) or nitrogen-saturated conditions (experimental group; nitrogen). The specimens in each group were subdivided into four subgroups, each exposed to different discoloration agents: distilled water, coffee, wine, and curry. Post-immersion color changes were measured using a digital spectrophotometer and analyzed using repeated-measures ANOVA. Fourier transform infrared (FT-IR) spectroscopy evaluated the degree of conversion of resin over immersion times for both post-curing conditions. Upon comparing the effects of post-curing conditions, a significant difference between the control and experimental groups in terms of immersion time in the wine and curry subgroups was found. FT-IR analysis showed a significant difference in the degree of conversion between the air and nitrogen groups from 10 to 300 s. These findings suggest that nitrogen-saturated post-curing can potentially enhance the conversion rate of 3D-printed resin crowns, thereby improving their color stability.

Evaluation of pediatric dentists' knowledge and approaches to tooth discoloration.

In recent years, esthetic expectations have come to the fore in pediatric dentistry, as in every field of dentistry. Therefore, to better meet patients' expectations, the steps taken to determine and improve the current level of knowledge of pediatric dentists on tooth discoloration gain importance. This study aims to measure the knowledge levels of pediatric dentists regarding tooth discoloration. A 33-questioned survey created online was emailed to pediatric dentists between March and December 2021. The first part included four multiple-choice and two open-ended questions regarding demographic characteristics. The second part was to measure the participants' knowledge of tooth discoloration. The last part was to evaluate the clinical approaches of the participants. Participants who agreed to answer all of the questions were included in the study (n = 129). The knowledge levels of the participants were scored according to the accuracy of their answers. The data were statistically analyzed using descriptive statistics and chi-square tests. Of the pediatric dentists who participated in this study, 16.3% had high knowledge, 79.8% had medium knowledge, and 3.9% had insufficient understanding of tooth discoloration. There was no correlation between time since dental school graduation and time spent practicing as a pediatric dentist (p > 0.05). The group with the highest average level of knowledge was the group most frequently encountered with tooth discoloration in the clinic (p ≤ 0.05). On average, pediatric dentists had moderate knowledge of tooth discoloration. The group with the highest average expertise in this field was the group that most frequently encountered and treated tooth discoloration. Information on tooth discoloration due to systemic factors was insufficient. To increase the knowledge level of pediatric dentists about the causes and treatments of tooth discoloration, it may be beneficial to establish training programs during and after specialization education.

[Laboratory evaluation of the effectiveness and safety of the Chairside Light Whitening System fläsh]. / Laboratornaya otsenka effektivnosti i bezopasnosti otbelivayushchei sistemy Chairside Light Whitening System fläsh.

THE AIM OF THE STUDY: Optimization of methods for treating dental discoloration using whitening systems based on hydrogen peroxide by laboratory studying their chemical properties. MATERIAL AND METHODS: The effectiveness of the bleaching system was assessed by quantitatively assessing the color change of model samples of hydroxyapatite (HAP) in the CIE L*a*b* system on a Spectron-M color analyzer after exposure to coloring food media. Safety assessment was carried out on samples made from teeth removed according to indications. RESULTS: The results of laboratory tests allow us to conclude that the Chairside Light Whitening System professional teeth whitening system fläsh. (WHITEsmile GmbH, Germany) has high whitening efficiency with a whitening degree of ~84%, which significantly exceeds the norm of GOST R 702.3.004-2021. the microhardness of the enamel of samples exposed to the whitening gel for 15 minutes changes extremely little. After exposure of the studied samples to the Chairside Light Whitening System fläsh whitening system for 45 minutes, an increase in digital microhardness indicators is observed, which indicates the dynamics of processes demineralizing the hard tooth structure. CONCLUSIONS: Chairside Light Whitening System fläsh professional teeth whitening system has high whitening efficiency with minimal impact on the teeth structure and high safety.

An in vitro evaluation of the effects of fluoride, CPP-ACP, or resin infiltration on discoloration caused by pediatric supplements.

OBJECTIVES: White spot lesions are more susceptible to staining agents due to their porous structure. This study examines the impact of white spot lesion treatments on discoloration caused by pediatric supplements. METHOD AND MATERIALS: Three treatments (fluoride, casein phosphopeptide-amorphous calcium phosphate [CPP-ACP], resin infiltration), a control, and their respective syrup-based subgroups (iron and black elderberry syrups) were established, each with eight teeth. Artificial white spot lesions were induced, and weekly applications of fluoride varnish, daily applications of CPP-ACP paste, or a single resin infiltration procedure were performed on the white spot lesions within the treatment groups over 4 weeks. Simultaneously, samples were exposed daily to iron or black elderberry syrups. Spectrophotometer measurements were taken at baseline, after demineralization (T0), and after 1 (T1), 2 (T2), and 4 weeks (T4). ΔE00 values were calculated. Statistical analysis was conducted using a three-way mixed-design ANOVA, with the significance level set at P = .05. RESULTS: At T4, ΔE00 values from all groups exceeded the clinical acceptability limit of 1.8. At T2 and T4, the ΔE00 values obtained from the black elderberry syrup subgroups were significantly higher (P < .001). At T4, the highest ΔE00 values were seen in the CPP-ACP groups (P < .001). The lowest ΔE00 values at T2 and T4 were observed in the resin infiltration groups (P < .05). CONCLUSIONS: Supplements containing ferrous sulfate and black elderberry extract caused color changes in white spot lesions that exceeded the clinical acceptability limit. Resin infiltration of white spot lesions provides advantages over remineralization treatments, particularly in minimizing discoloration induced by pediatric supplements.

Effects of enamel moistening and repositioning guide color on tooth whitening outcomes: A clinical trial.

This clinical trial investigated the effects of pre-application enamel moistening on the impact of a 37% carbamide peroxide whitener on tooth color changes and the influence of repositioning guide colors. Forty participants were randomly assigned to in-office tooth bleaching with either moistened enamel (experimental) or dry enamel (control). The whitener was applied for 45 min over two sessions. Tooth color was visually measured or assessed using a spectrophotometer with purple or green silicone guides. Tooth bleaching was assessed using CIE76 (ΔEab ) and CIEDE2000 (ΔE00 ) formulas and by whitening and bleaching index score changes. Moistening the enamel did not significantly affect tooth color. However, the guide color choice only impacted tooth color when measured instrumentally. At baseline, the green guide resulted in statistically significantly whiter teeth than the purple guide. Less pronounced differences in the b* coordinate between baseline and final measurements were found using the green guide. The green guide also produced lower ΔEab values and less change in indexes. In conclusion, moistening the enamel did not significantly impact tooth color changes. However, the repositioning guide color influenced the tooth bleaching measured instrumentally, except for ΔE00 .

Investigating the role of chlorogenic acids and coffee type in coffee-induced teeth discoloration.

OBJECTIVE: Coffee is one of the most popular beverages in the world, with millions of people consuming it every day. The effect of coffee on teeth discoloration has long been a concern for both coffee drinkers and dental professionals. To address this concern, this study aimed to investigate the role of chlorogenic acids (CGAs) and the type of coffee in coffee-induced teeth discoloration. MATERIALS AND METHODS: High-performance liquid chromatography with a photodiode array detector was used to determine the CGA contents of instant coffee produced by five manufacturers (Starbucks, Dunkin' Donuts, Kanu, Ediya, Coffee Bean). A total of 180 bovine tooth specimens were immersed in the coffee samples for varying durations (3, 9, 24, 48, and 72 h), and the discoloration levels were measured using a spectrophotometer. A linear mixed-effects model analysis was used to determine the significance of L*, a*, and b* values in relation to the duration of coffee immersion and coffee type. RESULTS: Both immersion time and coffee type had significant effects on tooth discoloration (p < 0.001), with some types of coffee being more strongly associated with tooth discoloration than others. The amount of CGAs present in coffee was found to be positively correlated with the degree of discoloration (p = 0.030). CONCLUSIONS: Prolonged exposure to coffee can exacerbate teeth staining, and different types of coffee can cause varying degrees of discoloration. Furthermore, coffee with higher levels of CGAs may lead to greater tooth discoloration.

Influence of repositioning guides' color and usage on precision in tooth color measurement with a clinical spectrophotometer

Abstract Repositioning guides are commonly employed in clinical studies to ensure consistent tooth color measurements. Yet, their influence on measured color remains uncertain. Objective This study evaluated the impact of repositioning guides' color and usage on tooth color measurement using a clinical spectrophotometer. Methodology In total, 18 volunteers participated in this study, in which the color of their upper left central incisor and upper left canine was measured with or without repositioning guides (control). The guides were made from pink, blue, or translucent silicone, as well as an acetate-based bleaching tray. Tooth color was measured in triplicates using a clinical spectrophotometer based on the CIELAB system. The standard deviations of these readings were used to estimate reproducibility, and color differences (ΔE00) between the measurements with guides and the control were calculated. Results Repositioning guides had a minimal effect on L* values and no effect on b* values. The use of pink silicone increased a* values, whereas blue or translucent silicone reduced them. Irrespective of the evaluated tooth, the lowest ΔE00 values were observed for the translucent silicone and bleaching tray. The usage of guides only affected data variability for the L* color coordinate. Conclusion Using repositioning guides can significantly impact the precision of tooth color measurement with a clinical spectrophotometer.

Efficacy of Glutathione Biomolecule in Reducing the Tooth Discoloration Associated with Silver Diamine Fluoride: A Split-mouth In vivo Study.

Background: The necessity to modify silver diamine fluoride (SDF) to make it esthetically acceptable without affecting its beneficial properties keeps the research in this field pertinent. Aim: This study aims to comparatively evaluate the efficacy of Glutathione (GSH) in reducing tooth discoloration associated with SDF. Materials and Methods: This split-mouth in vivo study was conducted on 20 children aged 3-8 years having a minimum of 3 active carious primary teeth. The three teeth in each patient were randomly divided into Group I - 38% SDF; Group II - 38% SDF followed by application of potassium iodide; and Group III - 38% SDF mixed with 20% GSH. Standardized photographs were taken immediately after application and after 6 months, which were analyzed using Image J software. The carious lesions were clinically classified as active or arrested after 6 months. Results: When mean gray values of three groups were compared postoperative, the highest value (lighter shade) was observed for group II and least (darker shade) for group I, whereas, during the 6-month follow-up, the highest value was seen for group III and least for group I. The color change from preoperative to 6 months' follow-up was compared, and a statistically significant difference was observed between groups I and II (P = 0.003) and groups I and III (P = 0.001). When caries arresting effectiveness was analyzed, there was no significant difference found between any of the groups (P = 1). Conclusion: Mixing 20% GSH with 38% SDF was an effective measure in reducing the tooth discoloration associated with SDF, without affecting caries arresting the efficiency of the latter.

Inhibition of Silver Diamine Fluoride-induced Tooth Discoloration by Using Natural Antioxidant: In Vitro Study.

AIM: Silver diamine fluoride (SDF) is a well-known caries preventive aid capable of arresting carious lesions and preventing secondary caries formation. Despite having the caries prevention potential, the clinical use of SDF is limited due to the tooth discoloration caused by SDF. The objective of this study was to evaluate the efficiency of natural antioxidants to inhibit SDF-induced tooth discoloration. MATERIALS AND METHODS: A total of 32 bovine teeth were polished to create a 6 mm circular window on the middle 1/3 (for enamel) or on the cervical 1/3 (for dentin) of the labial surface. Specimens were treated either with SDF alone or SDF followed by ascorbic acid (AA)/alpha lipoic acid (ALA)/7th generation bonding materials. The color parameters Lightness (L*), Chroma (C*), and Hue (H*) of the tooth window were measured at pretreatment, 1-hour, 1-week, and 1-month posttreatment using a digital color chromometer. RESULTS: Repeated measure ANOVA showed a significant tooth color alteration at 1-hour posttreatment. The L* and H* values dropped and C* value elevated significantly in 1-hour posttreatment measurement. All experimental groups showed significant tooth color alteration after treatment (p < 0.05) and were unable to reverse the discoloration even after 1-month period except the ALA group which did not show any significant (p > 0.05) color alteration compared with the pretreatment value. CONCLUSIONS: Within the limitation of the in vitro model and according to the results of this study, it can be concluded that ALA has the potential to prevent SDF-induced tooth discoloration; however, AA was unable to prevent the discoloration. CLINICAL SIGNIFICANCE: SDF induces discoloration of enamel and dentin can be reversed by applying Alpha lipoic acid immediacy after SDF application.

The effect of adding silver nanoparticles on the color stability of feldspathic porcelains.

Background: This study aims to investigate the color stability of feldspathic porcelains with different concentrations of silver nanoparticles (AgNPs). Materials and Methods: In this experimental study, feldspathic porcelain disks with AgNPs of 0 parts per million (ppm), 250 ppm, and 500 ppm were used (sample size = 180). These ceramic discs were subjected to thermocycling in tea, orange juice, and artificial saliva. The optical parameters of disks were measured before and after being immersed in the solutions. Then, the color change (ΔE 00) of the samples was measured by using the CIEDE 2000 formula. The data were analyzed by one-way analysis of variance (ANOVA) and Tukey's post hoc test. The level of significance was determined to be 0.05. Results: The results of the ANOVA test show that there was a significant difference in ΔE 00 (P ≤ 0.05). The maximum ΔE 00 was visible in the samples with AgNPs 0 ppm that were exposed to orange juice, and the minimum ΔE 00 was related to the disks with AgNPs 500 ppm in artificial saliva. Conclusion: Based on the results of this study, adding AgNPs to feldspathic porcelain increases the color stability of the ceramic discs.

Exploring the staining potential of 1 GSK-3 inhibitors in bovine teeth: 2 a one-year laboratory investigation.

GSK-3 inhibitors, such as Tideglusib (TG) and CHIR-99021 (CHIR), show promise in stimulating reparative dentin formation. The aim of this study was to assess the discoloration potential of TG and CHIR in an established in vitro model. Enamel-dentin specimens made from bovine incisors were randomly allocated to five groups (n=15 each): group bovine blood (BB), group dimethyl sulfoxide (DMSO), group TG, group CHIR, and group mineral trioxide aggregate (MTA). Each specimen had a central cavity in which the respective material was applied and sealed with resin-based luting material. Color determination was conducted using a dental spectrophotometer at t0 (before filling), t1 (immediately after filling), t2 (after one week), t3 (after one month), t4 (after three months), t5 (after six months), and t6 (after one year). Statistical analysis involved descriptive statistics, Kruskal-Wallis tests, and analysis of variance (α=0.05). Group BB and group CHIR exhibited the most significant decrease in lightness (ΔL*) after one year (ΔL*-4.7 and ΔL* -5.7, respectively), whereas groups DMSO, TG, and MTA showed minimal changes (DMSO ΔL*: -0.3; TG ΔL*: 1.4; MTA ΔL*: -0.5). Group BB and CHIR exhibited the highest ΔE values (6.4Å}0.6 and 6.5Å}0.8, respectively). Unlike CHIR, TG did not result in discoloration exceeding the threshold of visual perception, defined by a ΔE value of 5.5, during the one-year observation period. This laboratory study therefore suggests that TG could be utilized for indirect or direct pulp capping without major discoloration concerns. However, additional research is required to corroborate these findings.

The Impact of Prenatal Vitamin D on Enamel Defects and Tooth Erosion: A Systematic Review.

Prenatal Vitamin D has been suggested to be critical for dental health in children, affecting outcomes including the prevalence of enamel defects and tooth erosion. This systematic review aimed to evaluate the potential impact of prenatal Vitamin D levels on these dental health outcomes. A total of seven studies, involving 6978 participants, were included after a comprehensive search of PubMed, Web of Science, and Scopus from 2013 to June 2023. The average age of mothers varied across studies, with Vitamin D levels or supplementation practices displaying significant variation among the study populations. The age of children at examination ranged from 3.6 to 6.6 years. The analysis demonstrated a diverse association between Vitamin D levels and dental outcomes, with enamel defects reported in 21.1% to 64% of the children and opacities ranging from 36% to 79.5% across studies. Maternal Vitamin D insufficiency was identified as a significant risk factor for enamel defects in one study (OR: 3.55), whereas high prenatal Vitamin D levels indicated a protective effect against Hypomineralized Second Primary Molars (OR: 0.84) and Molar Incisor Hypomineralization (OR: 0.95) in another. Conversely, low Vitamin D levels increased the risk of enamel hypoplasia (OR: 1.29) and dental decay. The maternal and child demographics varied greatly across the studies, and the assessment and prevalence of Vitamin D deficiency or insufficiency were heterogenous. This review illuminates the potential influence of prenatal Vitamin D on dental health in children, underscoring the importance of adequate Vitamin D levels during pregnancy. However, more robust research is required to establish the optimal Vitamin D intake during pregnancy to ensure healthy dental outcomes in children.

Effects of whitening dentifrices on the enamel color, surface roughness, and morphology

The aim of this study was to evaluate the whitening and abrasion effects of dentifrices containing different whitening agents on artificially stained and unstained enamel. 160 human dental enamel discs were distributed into four groups according to the type of dentifrices applied on them (n=40): Group I, non-whitening dentifrice (control group); Group II, dentifrice containing charcoal; Group III, dentifrice containing blue covarine; Group IV, dentifrice containing hydrogen peroxide. Half of the specimens in each group were immersed in coffee solution. Color measurements were evaluated from stained and unstained specimens before and after brushing by a spectrophotometer. The surface roughness of each unstained specimen was analyzed using a profilometer after the brushing and bleaching. The surface of one randomly selected specimen from each group was observed using a scanning electron microscope (SEM). Statistical analysis of the color change was performed using the Kruskal-Wallis test. The one-way ANOVA was used to evaluate surface roughness. Group III provided significantly higher recovery on ΔE00 values than other groups on the unstained enamel (p<0.05). Group IV showed significantly the highest ΔE00 values on stained enamel (p<0.05) and also Group IV showed the highest surface roughness values (p<0.05), SEM revealed a more irregular surface in groups III and IV. It can be stated that dentifrice containing blue covarine is both an effective and a safe way to provide whiter teeth with routine home tooth brushing.

El objetivo de este estudio fue evaluar los efectos de blanqueamiento y abrasión de los dentífricos que contienen diferentes agentes blanqueadores en el esmalte teñido y no teñido artificialmente. Se distribuyeron 160 discos de esmalte dental humano en cuatro grupos según el tipo de dentífrico aplicado sobre ellos (n=40): Grupo I, dentífrico no blanqueador (grupo control); Grupo II, dentífrico que contiene carbón vegetal; Grupo III, dentífrico que contiene azul; Grupo IV, dentífrico que contiene peróxido de hidrógeno. La mitad de los especímenes de cada grupo se sumergieron en una solución de café. Las mediciones de color se evaluaron a partir de especímenes teñidos y no teñidos antes y después del cepillado con un espectrofotómetro. La rugosidad de la superficie de cada muestra sin teñir se analizó utilizando un perfilómetro después del cepillado y del clareamiento. La superficie de un espécimen seleccionado al azar de cada grupo se observó utilizando un microscopio electrónico de barrido (MEB). El análisis estadístico del cambio de color se realizó utilizando la prueba de Kruskal-Wallis. Se utilizó el ANOVA para evaluar la rugosidad de la superficie. El grupo III proporcionó una recuperación significativamente mayor en los valores de ΔE00 que otros grupos en el esmalte no teñido (p<0,05). El Grupo IV mostró significativamente los valores más altos de ΔE00 en el esmalte teñido (p<0.05) y también el Grupo IV mostró los valores más altos de rugosidad superficial (p<0.05), el análisis en MEB reveló una superficie más irregular en los grupos III y IV. Se puede afirmar que el dentífrico que contiene azul es una forma efectiva y segura de proporcionar dientes más claros con el cepillado de rutina en el hogar.

The Evaluation of Different Polishing Techniques' Effects on the Post-operative External Staining of Enamel in Primary and Permanent Tooth.

Objective This study aimed to examine patient complaints on recoloration development after polishing applications in primary and permanent teeth that differed in enamel composition and to determine the ideal polishing method. Methods A total of 30 permanent upper incisors and 30 primary molars were randomly divided into three groups of 10 using three different polishing techniques. Each polishing method (rubber, brush, and air polishing) was applied to the test surface of its own group. Milk and coffee were used in the coloring processes. A spectrophotometer was used for color measurements. Color change (∆E) was calculated between control and test surfaces and between the three measurement points. Results In the primary teeth's test surfaces, the rubber and brush groups were significantly more colored than the air-polishing group, when compared between after polishing and after coloration (p ˂ 0.05). Furthermore, the color difference of the permanent teeth between the initial measurements and after coloration was significantly higher in the rubber group's test surface compared to the air-polished group (p ˂ 0.05). The average ∆E values in both primary and permanent teeth were as follows: rubber > brush > air polishing. Conclusions Compared to rubber or brush polishing, air polishing seems safer to avoid predisposition to postoperative enamel discoloration. Primary teeth are more colored than permanent teeth. The effect of polishing on postoperative coloring should always be considered, and air polishing should be preferred whenever possible.

Spectrophotometric Analysis of Coronal Discoloration In Vitro Induced by Bioceramic Cements.

The aim of this study was to evaluate and quantify, in vitro, the extent of coronal discoloration induced by bioceramic materials over time. In total, 44 human monoradicular teeth were divided into four groups (n = 11), according to the applied material: Negative control (NC); White MTA ProRoot® (WMTAP); Biodentine™ (BD); and TotalFill® BC RRM™ Putty (TF). Teeth were immersed in saline solution and incubated at 37 °C; the following periods of time were defined: before incubation: [t0]-without bioceramic material, t1-immediately after the bioceramic material placement; after incubation: t24h-24 h, t7d-7 days, and 30d-30 days. Descriptive and inferential statistical analysis were performed. Cochran's Q test was used to evaluate coronal discoloration across the different groups, while the Kruskal-Wallis test was employed to determine differences in discoloration among the groups at each time interval. Additionally, the Friedman test was applied to analyze the variations in discoloration within each group over time. A significance level of 5% was set. All experimental groups revealed coronal discoloration over time: NC (p = 0.001), WMTAP (p < 0.001), BD (p = 0.001), and TF (p = 0.006). No significant differences were observed between groups for each time interval (p > 0.05). The WMTAP group varied the most considering the intervals [t0-t1] and [t24h-t7d] (p = 0.037) compared to the remaining experimental groups.